 |  | | Sodium Chloride's additional information
Material Safety Data sheet (MSDS) Sodium Chloride in Brine
I. Product Identification
* Manufacturer: Industria del Alcali, S.A. de C.V.
* Address: Carretera a Garcia Km. 9 Garcia, NL.
* Telephone: (81) 8863-2600.
* Chemical Name: Sodium Chloride Solution.
* Chemical Family: Sodium Chloride Brine Alkaline Salts.
* Chemical Formula: NaCl.
II. Dangerous Ingredients
It does not present noxious substances
III. Components
* Sodium Chloride: 310 Grs./Lto.
* CAS Number: 7647 14 5.
IV. Physical Data
* Density at 25 °C: 1.2 Gr./ C.C.
* Viscosity at 25 °C: 1.60 Centipoises.
* Color: White.
* Appearance: Aqueous Solution.
V. Fire and Explosion Information
* Sodium Chloride solution is a natural NON - FLAMMABLE product.
VI. Reactivity Data
* Stability: It is stable product at normal conditions.
* Incompatibility: The Sodium Chloride aqueous solutions slowly corrode metals, aluminum and alloys are attacked.
VII. Cautions
* It is not absorbed through skin.
* In case of contact with the eyes: Wash immediately with running water, for at least fifteen minutes. Call a doctor or take patient to the nearest medical institution.
* In case of contact with the skin: Wash with water until it is clean.
* Clothes: Wash before using again.
VIII. Personal Safety Equipment
* During the handling and use of Sodium Chloride it is convenient to protect:
a) The respiratory system, by using a breathing mask with dust filter.
b) The eyes, using safety glasses or goggles.
c) The skin , using gloves, and apron which does not permit alkaline solutions to pass throuth
IX. Spills and Wastes
* If the Salt in Brine is spilled, you should stop the leak if it can be done without risk.
* Wash with plenty of water and con tain to avoid its flow through warerways and the sewage system. Ask for assistance for its disposal.
* Salt in Brine waste should be handled according to the actual state and/or Federal regulation.
| |
